Successive Projections Algorithm Research Articles

Quantitative measurement of internal quality of carrots using hyperspectral imaging and multivariate analysis

The study aimed to measure the carotenoid (Car) and pH contents of carrots using hyperspectral imaging. A total of 300 images were collected using a hyperspectral imaging system, covering 472 wavebands from 400 to 1000 nm. Regions of interest (ROIs) were defined to extract average spectra from the hyperspectral images (HIS). We developed two models: least squares support vector machine (LS-SVM) and partial least squares regression (PLSR) to establish a quantitative analysis between the pigment amounts and spectra. The spectra and pigment contents were predicted and correlated using these models. The selection of EWs for modeling was done using the Successive Projections Algorithm (SPA), regression coefficients (RC) from PLSR models, and LS-SVM. The results demonstrated that hyperspectral imaging could effectively evaluate the internal attributes of carrot cortex and xylem. Moreover, these models accurately predicted the Car and pH contents of the carrot parts. This study provides a valuable approach for variable selection and modeling in hyperspectral imaging studies of carrots.

In Situ Nondestructive Detection of Nitrogen Content in Soybean Leaves Based on Hyperspectral Imaging Technology

In this paper, hyperspectral imaging technology, combined with chemometrics methods, was used to detect the nitrogen content of soybean leaves, and to achieve the rapid, non-destructive and in situ detection of the nitrogen content in soybean leaves. Soybean leaves under different fertilization treatments were used as the research object, and the hyperspectral imaging data and the corresponding nitrogen content data of soybean leaves at different growth stages were obtained. Seven spectral preprocessing methods, such as Savitzky–Golay smoothing (SG), first derivative (1-Der), and direct orthogonal signal correction (DOSC), were used to establish the quantitative prediction models for soybean leaf nitrogen content, and the quantitative prediction models of different spectral preprocessing methods for soybean leaf nitrogen content were analyzed and compared. On this basis, successive projections algorithm (SPA), genetic algorithm (GA) and random frog (RF) were employed to select the characteristic wavelengths and compress the spectral data. The results showed the following: (1) The full-spectrum prediction model of soybean leaf nitrogen content based on DOSC pretreatment was the best. (2) The PLS model of soybean leaf nitrogen content based on the five characteristic wavelengths had the best prediction performance. (3) The spatial distribution map of soybean leaf nitrogen content was generated in a pixel manner using the extracted five characteristic wavelengths and the DOSC-RF-PLS model. The nitrogen content level of soybean leaves can be quantified in a simple way; this provides a foundation for rapid in situ non-destructive detection and the spatial distribution difference detection of soybean leaf nitrogen. (4) The overall results illustrated that hyperspectral imaging technology was a powerful tool for the spatial prediction of the nitrogen content in soybean leaves, which provided a new method for the spatial distribution of the soybean nutrient status and the dynamic monitoring of the growth status.

Hyperspectral imaging combined with GA‐SVM for maize variety identification

AbstractThe demand for identification of maize varieties has increased dramatically due to the phenomenon of mixed seeds and inferior varieties pretending to be high‐quality varieties continuing to occur. It is urgent to solve the problem of efficient and accurate identification of maize varieties. A hyperspectral image acquisition system was used to acquire images of maize seeds. Regions of interest (ROI) with an embryo size of 10 × 10 pixel were extracted, and the average spectral information in the range of 949.43–1709.49 nm was intercepted for the subsequent study in order to eliminate random noise at both ends. Savitzky–Golay (SG) smoothing algorithm and multiple scattering correction (MSC) were used to pretreat the full‐band spectrum. The feature wavelengths were screened by successive projection algorithms (SPA), competitive adaptive reweighted sampling (CARS) single screening, and two combinations of CARS‐SPA and CARS + SPA, respectively. Support vector machines (SVMs) and models optimized based on genetic algorithm (GA), particle swarm optimization (PSO) were established by using full bands (FB) and feature bands as the model input. The results showed that the MSC‐(CARS‐SPA)‐GA‐SVM model had the best performance with 93.00% of the test set accuracy, 8 feature variables, and a running time of 24.45 s. MSC pretreatment can effectively eliminate the scattering effect of spectral data, and the feature wavelengths extracted by CARS‐SPA can represent all wavelength information. The study proved that hyperspectral imaging combined with GA‐SVM can realize the identification of maize varieties, which provided a theoretical basis for maize variety classification and authenticity identification.

In-field and non-destructive determination of comprehensive maturity index and maturity stages of Camellia oleifera fruits using a portable hyperspectral imager

To efficiently detect the maturity stages of Camellia oleifera fruits, this study proposed a non-invasive method based on hyperspectral imaging technology. First, a portable hyperspectral imager was used for the in-field image acquisition of Camellia oleifera fruits at three maturity stages, and ten quality indexes were measured as reference standards. Then, factor analysis was performed to obtain the comprehensive maturity index (CMI) by analyzing the change trends and correlations of different indexes. To reduce the high dimensionality of spectral data, the successive projection algorithm (SPA) was employed to select effective feature wavelengths. The prediction models for CMI, including partial least squares regression (PLSR), support vector regression (SVR), extreme learning machine (ELM), and convolutional neural network regression (CNNR), were constructed based on full spectra and feature wavelengths; for CNNR, only the raw spectra were used as input. The SPA-CNNR model exhibited more promising performance (RP = 0.839, RMSEP = 0.261, and RPD = 1.849). Furthermore, PLS-DA models for maturity discrimination of Camellia oleifera fruits were developed using full wavelength, characteristic wavelengths and their fusion CMI, respectively. The PLS-DA model using the fused dataset achieved the highest maturity classification accuracy, with the best simplified model achieving 88.6 % accuracy in prediction set. This study indicated that a portable hyperspectral imager can be used for in-field determination of the internal quality and maturity stages of Camellia oleifera fruits. It provides strong support for non-destructive quality inspection and timely harvesting of Camellia oleifera fruits in the field.

Quantitative analysis of three ingredients in Salvia miltiorrhiza by near infrared spectroscopy combined with hybrid variable selection strategy

Rosmarinic acid (RA), Tanshinone IIA (Tan IIA), and Salvianolic acid B (Sal B) are crucial compounds found in Salvia miltiorrhiza. Quickly predicting these components can aid in ensuring the quality of S. miltiorrhiza. Spectral preprocessing and variable selection are essential processes in quantitative analysis using near infrared spectroscopy (NIR). A novel hybrid variable selection approach utilizing iVISSA was employed in this study to enhance the quantitative measurement of RA, Tan IIA, and Sal B contents in S. miltiorrhiza. The spectra underwent 108 preprocessing approaches, with the optimal method being determined as orthogonal signal correction (OSC). iVISSA was utilized to identify the intervals (feature bands) that were most pertinent to the target chemical. Various methods such as bootstrapping soft shrinkage (BOSS), competitive adaptive reweighted sampling (CARS), genetic algorithm (GA), variable combination population analysis (VCPA), successive projections algorithm (SPA), iteratively variable subset optimization (IVSO), and iteratively retained informative variables (IRIV) were used to identify significant feature variables. PLSR models were created for comparison using the given variables. The results fully demonstrated that iVISSA-SPA calibration model had the best comprehensive performance for Tan IIA, and iVISSA-BOSS had the best comprehensive performance for RA and Sal B, and correlation coefficients of cross-validation (R2cv), root mean square errors of cross-validation (RMSECV), correlation coefficients of prediction (R2p), and root mean square errors of prediction (RMSEP) were 0.9970, 0.0054, 0.9990 and 0.0033, 0.9992 0.0016, 0.9961 and 0.0034, 0.9998, 0.0138, 0.9875 and 0.1090, respectively. The findings suggest that NIR spectroscopy, along with PLSR and a hybrid variable selection method using iVISSA, can be a valuable tool for quickly quantifying RA, Sal B, and Tan IIA in S. miltiorrhiza.

基于可见/近红外光谱的鲜枣可溶性固形物在线检测

Soluble solid content (SSC) is one of the important evaluation indexes of the internal quality and taste of fresh jujube. In order to realize the online nondestructive detection of SSC of fresh jujube, this paper took Huping jujube as the research object, adopted self-constructed nondestructive online testing system to collect the spectral information of jujubes (350~2500 nm), and studied the influence of the rotational speed of 4 r/min on the online prediction model of SSC of jujube. Kennard-Stone (KS) algorithm was used to divide the sample into correction set and prediction set. Six commonly used preprocessing methods such as SG smoothing (S-G), multiplicative scatter correction (MSC), standard normal variate (SNV), orthogonal signal correction (OSC), first derivative (FD), and second derivative (SD) were applied to the spectral data, and the regression coefficient (RC) algorithm and the successive projections algorithm (SPA) were utilized to select informative wavelengths, and a quantitative prediction model for the SSC of Huping jujube was established using partial least squares regression (PLSR). The results indicate that the PLSR prediction model established by preprocessing the original spectrum with OSC and combining it with RC algorithm to select characteristic wavelengths was optimal. Therefore, when predicting the SSC of Huping jujube, the optimal model was OSC-RC-PLSR, and the correlation coefficients of the correction set and prediction set were 0.846 and 0.782, respectively, and the corrected root mean square error (RMSEC) and predicted root mean square error (RMSEP) were 1.962 and 2.247, respectively. The results show that non-destructive detection of soluble solid content of jujube can be achieved by combining visible-near-infrared spectroscopy and appropriate regression model, which provides an innovative way for online sorting and identifying fresh jujube.

A multispectral imaging system developed based on the spectral feature selection method for identification of housefly pupae

Hyperspectral imaging systems can simultaneously obtain spectral and spatial information of fly pupae, especially achieving a large area of spectral information collection in a short period. However, hyperspectral imaging systems are expensive and require much computation. This study attempts to develop a four-channel spectral imaging system composed of a camera and four filters to achieve spectral discrimination of housefly pupae over a large area. It also aims to verify the feasibility of using spectral feature selection methods to guide the development of low-cost specialized spectral systems. Meanwhile, a strategy combining spectral degradation with the traversal method was proposed for determining the parameter indicators of optical components. Firstly, use a microspectrometer to acquire the spectra of fly pupae. Secondly, the successive projections algorithm (SPA) extracts four feature wavelengths related to fly pupa recognition from the full spectrum variables. Then, based on the strategy of spectral degradation combined with the traversal method, the parameters of the four filters are determined. Finally, a 4-channel spectral imaging system was constructed, and a prediction model was built with random forest (RF), while the spectral index (SI) method was used to improve model performance. The results indicate that this low-cost multispectral imaging system can achieve high-performance discrimination of housefly pupae (accuracy = 97.44 %). At the same time, SPA, spectral degradation, and traversal methods can provide effective central wavelength and resolution indicators for constructing low-cost multispectral imaging systems, offering a practical and feasible example to guide the development of specialized low-cost spectral devices using spectral feature selection methods.

Quantitative analysis of the hexamethylenetetramine concentration in a hexamethylenetetramine–acetic acid solution using near infrared spectroscopy: A comprehensive study on preprocessing methods and variable selection techniques

Hexamethylenetetramine (HA) is widely used as a raw material in the medical, chemical, industrial, and military industries, and the fast and quantitative analysis of HA is important for manufacturing processes in these fields. Owing to its efficiency, low cost, nondestructive testing, and convenience, near infrared (NIR) spectroscopy is a powerful technique for quantitatively analyzing the HA concentration in HA–acetic acid (HAc) solutions, demonstrating application potential in the production of hexogen and octogen. A series of preprocessing algorithms and variable selection methods were studied to improve the detection accuracy of the NIR spectroscopic calibration. Forty-six different combinations of standard normal variation (SNV), multiplicative signal correction (MSC), first derivative (1stDer), second derivative (2ndDer), and discrete wavelet transform (DWT) were screened. The effects of four variable selection methods (successive projection algorithm (SPA), uninformed variable elimination (UVE), competitive adaptive reweighted sampling (CARS), and multiverse optimization (MVO)) were compared. Finally, a model (SPXY-SNV-1stDer-DWT-MVO-RF) was developed by combining sample set portioning based on the joint x–y distance (SPXY) algorithm with the random forest (RF) calibration model, and MVO was combined with the NIR technique for the first time. The model achieved a coefficient of determination for the calibration set (R2), root mean square error of the calibration set (RMSEC), coefficient of determination for the prediction set (r2), and root mean square error of the prediction set (RMSEP) of 1.000, 0.04%, 0.999, and 0.05%, respectively. This study demonstrated the novelty and feasibility of HA quantitative detection by NIR spectroscopy and provided valuable insights for optimizing quantitative analysis models by optimizing algorithms, indicating the great application potential of NIR spectroscopy in related fields.

Non-Destructive Classification of Maize Seeds Based on RGB and Hyperspectral Data with Improved Grey Wolf Optimization Algorithms

Ensuring the security of germplasm resources is of great significance for the sustainable development of agriculture and ecological balance. By combining the morphological characteristics of maize seeds with hyperspectral data, maize variety classification has been achieved using machine learning algorithms. Initially, the morphological data of seeds are obtained from images, followed by the selection of feature subsets using Recursive Feature Elimination (RFE) and Select From Model (SFM) methods, indicating that features selected by RFE exhibit better performance in maize seed classification. For hyperspectral data (350–2500 nm), Competitive Adaptive Re-weighted Sampling (CARS) and the Successive Projections Algorithm (SPA) are employed to extract feature wavelengths, with the SPA algorithm demonstrating superior performance in maize seed classification tasks. Subsequently, the two sets of data are merged, and a Random Forest (RF) classifier optimized by Grey Wolf Optimization (GWO) is utilized. Given the limitations of GWO, strategies such as logistic chaotic mapping for population initialization, random perturbation, and final replacement mechanisms are incorporated to enhance the algorithm’s search capabilities. The experimental results show that the proposed ZGWO-RF model achieves an accuracy of 95.9%, precision of 96.2%, and recall of 96.1% on the test set, outperforming the unimproved model. The constructed model exhibits improved identification effects on multi-source data, providing a new tool for non-destructive testing and the accurate classification of seeds in the future.

Investigation of Using Hyperspectral Vegetation Indices to Assess Brassica Downy Mildew.

Downy mildew caused by Hyaloperonospora brassicae is a severe disease in Brassica oleracea that significantly reduces crop yield and marketability. This study aims to evaluate different vegetation indices to assess different downy mildew infection levels in the Brassica variety Mildis using hyperspectral data. Artificial inoculation using H. brassicae sporangia suspension was conducted to induce different levels of downy mildew disease. Spectral measurements, spanning 350 nm to 1050 nm, were conducted on the leaves using an environmentally controlled setup, and the reflectance data were acquired and processed. The Successive Projections Algorithm (SPA) and signal sensitivity calculation were used to extract the most informative wavelengths that could be used to develop downy mildew indices (DMI). A total of 37 existing vegetation indices and three proposed DMIs were evaluated to indicate downy mildew (DM) infection levels. The results showed that the classification using a support vector machine achieved accuracies of 71.3%, 80.7%, and 85.3% for distinguishing healthy leaves from DM1 (early infection), DM2 (progressed infection), and DM3 (severe infection) leaves using the proposed downy mildew index. The proposed new downy mildew index potentially enables the development of an automated DM monitoring system and resistance profiling in Brassica breeding lines.

Deoxynivalenol Detection beyond the Limit in Wheat Flour Based on the Fluorescence Hyperspectral Imaging Technique.

Deoxynivalenol (DON) is a harmful fungal toxin, and its contamination in wheat flour poses a food safety concern globally. This study proposes the combination of fluorescence hyperspectral imaging (FHSI) and qualitative discrimination methods for the detection of excessive DON content in wheat flour. Wheat flour samples were prepared with varying DON concentrations through the addition of trace amounts of DON using the wet mixing method for fluorescence hyperspectral image collection. SG smoothing and normalization algorithms were applied for original spectra preprocessing. Feature band selection was carried out by applying the successive projection algorithm (SPA), uninformative variable elimination (UVE), competitive adaptive reweighted sampling (CARS), and the random frog algorithm on the fluorescence spectrum. Random forest (RF) and support vector machine (SVM) classification models were utilized to identify wheat flour samples with DON concentrations higher than 1 mg/kg. The results indicate that the SG-CARS-RF and SG-CARS-SVM models showed better performance than other models, achieving the highest recall rate of 98.95% and the highest accuracy of 97.78%, respectively. Additionally, the ROC curves demonstrated higher robustness on the RF algorithm. Deep learning algorithms were also applied to identify the samples that exceeded safety standards, and the convolutional neural network (CNN) model achieved a recognition accuracy rate of 97.78% for the test set. In conclusion, this study demonstrates the feasibility and potential of the FHSI technique in detecting DON infection in wheat flour.

Prediction and visualization map for physicochemical indices of kiwifruits by hyperspectral imaging.

Soluble solid content (SSC), firmness, and color (L*, a*, and b*) are important physicochemical indices for assessing the quality and maturity of kiwifruits. Therefore, this research aimed to realize the nondestructive detection and visualization map for the physicochemical indices of kiwifruits at different maturity stages by hyperspectral imaging coupled with the chemometrics. To further improve the detection accuracy and working efficiency of the models, competitive adaptive reweighted sampling (CARS) and successive projection algorithm were employed to choose feature wavelengths for predicting the physicochemical indices of kiwifruits. Multiple linear regression (MLR) was designed to develop simplified detection models based on feature wavelengths for determining the physicochemical indices of kiwifruits. The results showed that 32, 18, 26, 29, and 32 feature wavelengths were extracted from 256 full wavelengths to predict the SSC, firmness, L*, a*, and b*, respectively, with the CARS algorithm. Not only was the working efficiency of the CARS-MLR model improved, but the prediction accuracy of the CARS-MLR model for determining the physicochemical indices was also at its relative best. The residual predictive deviations of the CARS-MLR model for determining the SSC, firmness, L*, a*, and b* were 3.09, 2.90, 2.32, 2.74, and 2.91, respectively, which were all above 2.3. Compared with the model based on the full spectra, the CARS-MLR model could be used to predict the physicochemical indices of kiwifruits. Finally, the visualization map for the physicochemical indices of kiwifruits at different maturity stages was generated by calculating the spectral response of each pixel on the kiwifruit samples with the CARS-MLR model. This made the detection for the physicochemical indices of kiwifruits more intuitive. This study demonstrates that hyperspectral imaging coupled with the chemometrics is promising for the nondestructive detection and visualization map for the physicochemical indices of kiwifruits, and also provides a novel theoretical basis for the nondestructive detection of kiwifruit quality.

Escherichia coli research on Raman measurement mechanism and diagnostic model

Escherichia coli (E. coli) is one of the most important pathogenic bacteria causing poultry diseases, characterized by a wide distribution range, rapid spread, and high mortality rate. Early diagnosis of E. coli in poultry feces provides the possibility for targeted treatment and rapid recovery of diseased poultry, and more importantly, prevents the rapid spread of pathogens among densely bred poultry. In order to implement rapid, low-cost, and high-frequency detection of E. coli, this study explored the feasibility of Raman spectroscopy. Firstly, theoretical configurations and density functional calculations of N-acetylmuramic acid and N-acetylglucosamine in the cell wall of E. coli were performed. Then, Raman measurement models for E. coli were established based on two feature extraction methods (Successive Projections Algorithm, Competitive Adaptive Reweighted Sampling) and four modeling methods (Random Forest Algorithm, Convolutional Neural Networks, Back Propagation Neural Networks, Radial Basis Function). Finally, a method based on the extraction of Raman spectral features using density functional theory was determined to optimize the existing models, and it was demonstrated that this feature variable extraction method improved the accuracy of all four measurement models to some extent. Ultimately, the optimal model, the improved SPA-RF, was obtained through comparative analysis, with an accuracy, precision, recall, specificity, FNR, FDR, and AUC of 98.38%, 98.61%, 99.83%, 88.08%, 0.81%, 11.82%, and 1, respectively. This study reports an early method for the early treatment of E. coli diseases and provides a molecular structure database for studying N-acetylmuramic acid and N-acetylglucosamine, as well as a basis for vibrational spectroscopy detection of E. coli diseases, promoting the application of Raman spectroscopy technology in the diagnosis of livestock diseases.

Improving potato AGB estimation to mitigate phenological stage impacts through depth features from hyperspectral data

The accurate estimation of above ground biomass (AGB) is valuable in grasping the status of potato growth and assessing yield. Spectral analysis techniques play an important role in AGB estimation by virtue of its non-destructive and rapid advantages. However, the models constructed based on spectral features at the entire growth stages due to differences in phenological stages, such as vegetation indices (VIs) and locations at fixed wavelengths, can be not applicable to single growth stages. Therefore, the main objective of this study is to improve the applicability of the AGB estimation model to mitigate the impacts of phenological stages by mining depth features from hyperspectral data. The canopy hyperspectral and AGB data of potato tuber formation, tuber growth and starch accumulation stages were measured in 2017–2019. The acquired canopy hyperspectral reflectance was smoothed by Savitzky-Golay (SG) filter, and the green edge (GE), the red edge (RE), red edge chlorophyll index (CIred-edge), optimized soil adjusted vegetation index (OSAVI), green normalized difference vegetation index (GNDVI), and normalized difference vegetation index (NDVI) were extracted. The spectral changes were analyzed at different growth stages of each year. To obtain features in response to AGB changes, a new approach is proposed to analyze the hidden depth features between sensitive wavelengths by combining a successive projections algorithm (SPA) and a long-short-term memory network (LSTM). The AGB estimation models were constructed by partial least squares regression (PLSR) based on traditional VIs + GE + RE, full spectrum, sensitive wavelengths obtained by SPA, and depth features obtained by SPA-LSTM. The results showed that GE, RE and VIs alone explained only 24 %-36 % of the variation in AGB. The accuracy of estimating AGB at sensitive wavelengths obtained after SPA was higher (R2 = 0.70, RMSE = 406 kg/hm2, and NRMSE = 27.14 %) than that of conventional VIs + GE + RE (R2 = 0.51, RMSE = 536 kg/hm2, and NRMSE = 35.81 %) and full spectrum (R2 = 0.63, RMSE = 452 kg/hm2, and NRMSE = 30.19 %) in the three-year dataset. The depth features extracted by the SPA-LSTM method proposed in this study achieved the best AGB estimation (R2 = 0.82, RMSE = 318 kg/hm2, and NRMSE = 21.25 %). The applicability of the model was validated in different years and growth stages. The R2 of each year was in the range of 0.48–0.77, the RMSE was in the range of 290–367 kg/hm2, and the NRMSE was in the range of 16.69 %-25.81 %. The R2 of each growth stage within three year was in the range of 0.48–0.78, the RMSE was in the range of 184–386 kg/hm2, and the NRMSE was in the range of 14.91 %-29.45 %. The method proposed in this study mitigates the impacts of phenological stage and improves the robustness and accuracy of the AGB estimation model, which provides remote sensing technical support for realizing potato growth monitoring and yield assessment in the field.

Potential of Unmanned Aerial Vehicle Red-Green-Blue Images for Detecting Needle Pests: A Case Study with Erannis jacobsoni Djak (Lepidoptera, Geometridae).

Erannis jacobsoni Djak (Lepidoptera, Geometridae) is a leaf-feeding pest unique to Mongolia. Outbreaks of this pest can cause larch needles to shed slowly from the top until they die, leading to a serious imbalance in the forest ecosystem. In this work, to address the need for the low-cost, fast, and effective identification of this pest, we used field survey indicators and UAV images of larch forests in Binder, Khentii, Mongolia, a typical site of Erannis jacobsoni Djak pest outbreaks, as the base data, calculated relevant multispectral and red-green-blue (RGB) features, used a successive projections algorithm (SPA) to extract features that are sensitive to the level of pest damage, and constructed a recognition model of Erannis jacobsoni Djak pest damage by combining patterns in the RGB vegetation indices and texture features (RGBVI&TF) with the help of random forest (RF) and convolutional neural network (CNN) algorithms. The results were compared and evaluated with multispectral vegetation indices (MSVI) to explore the potential of UAV RGB images in identifying needle pests. The results show that the sensitive features extracted based on SPA can adequately capture the changes in the forest appearance parameters such as the leaf loss rate and the colour of the larch canopy under pest damage conditions and can be used as effective input variables for the model. The RGBVI&TF-RF440 and RGBVI&TF-CNN740 models have the best performance, with their overall accuracy reaching more than 85%, which is a significant improvement compared with that of the RGBVI model, and their accuracy is similar to that of the MSVI model. This low-cost and high-efficiency method can excel in the identification of Erannis jacobsoni Djak-infested regions in small areas and can provide an important experimental theoretical basis for subsequent large-scale forest pest monitoring with a high spatiotemporal resolution.

Nondestructive Determination of Epicarp Hardness of Passion Fruit Using Near-Infrared Spectroscopy during Storage.

The hardness of passion fruit is a critical feature to consider when determining maturity during post-harvest storage. The capacity of near-infrared diffuse reflectance spectroscopy (NIRS) for non-destructive detection of outer and inner hardness of passion fruit epicarp was investigated in this work. The passion fruits' spectra were obtained using a near-infrared spectrometer with a wavelength range of 10,000-4000 cm-1. The hardness of passion fruit's outer epicarp (F1) and inner epicarp (F2) was then measured using a texture analyzer. Moving average (MA) and mean-centering (MC) techniques were used to preprocess the collected spectral data. Competitive adaptive reweighted sampling (CARS), successive projection algorithm (SPA), and uninformative variable elimination (UVE) were used to pick feature wavelengths. Grid-search-optimized random forest (Grids-RF) models and genetic-algorithm-optimized support vector regression (GA-SVR) models were created as part of the modeling process. After MC preprocessing and CARS selection, MC-CARS-Grids-RF model with 7 feature wavelengths had the greatest prediction ability for F1. The mean square error of prediction set (RMSEP) was 0.166 gN. Similarly, following MA preprocessing, the MA-Grids-RF model displayed the greatest predictive performance for F2, with an RMSEP of 0.101 gN. When compared to models produced using the original spectra, the R2P for models formed after preprocessing and wavelength selection improved. The findings showed that near-infrared spectroscopy may predict the hardness of passion fruit epicarp, which can be used to identify quality during post-harvest storage.

Accurate determination of sorghum origin based on hyperspectral imaging technology and machine learning

AbstractSorghum is an important crop, and the quality of sorghum of the same variety from different geographic origins varies greatly. This study focuses on HongYingZi sorghum from five distinct origins, employing a combination of hyperspectral imaging (HSI) technology and machine learning algorithms to investigate methods for classifying sorghum origin. Multiplicative scatter correction and the Savizkg‐Golay algorithms were used to preprocess HSI data, and the characteristic wavelengths were screened by the successive projections algorithm (SPA). Based on AdaBoost, ExtraTreesClassifier, Gradient Boosting, Decision Tree, and Random Forest algorithms, classification models based hyperspectral data were established respectively, and validation experiments were conducted. The results show that for the full‐band spectra, the ExtraTreesClassifier algorithm has the highest accuracy; the average accuracy on the training set and test set were 0.9925 and 0.9854, respectively. The classification results were visualized and analyzed using Python. The results highlight the effectiveness of HSI combined with machine learning algorithms in achieving nondestructive detection of sorghum origin within the same variety. This study provides a precise method for rapid and nondestructive determination of sorghum origin.

Quantitative analysis of reducing sugars in solid‐state fermentation based on NIR combined with GA‐AdaBoost

SummaryThis study focuses primarily on the real‐time monitoring of reducing sugar levels throughout solid‐state ethanol fermentation. A predictive model for accurate quantification of reducing sugar levels will be formulated through a comprehensive analysis of near‐infrared spectra across different fermentation stages. Building a predictive model using Adaptive Boosting (AdaBoost), The spectral data was pre‐processed using the Standard Normal Variate (SNV) method, followed by feature band selection using the Genetic Algorithm (GA), resulting in the identification of 181 characteristic wavelengths. The resulting GA‐AdaBoost model has excellent performance metrics: of 0.989, RMSEC of 0.393, of 0.978, RMSEP of 0.640, RPD of 6.651 and RER of 0.142. Comparative evaluations against Competitive Adaptive Reweighted Sampling (CARS), Successive Projection Algorithm (SPA), Uninformative Variable Elimination (UVE) and Principal Component Analysis (PCA) consistently underscore the superior efficacy of the GA‐AdaBoost model. These results robustly confirm its reliability in accurately quantifying reducing sugars in solid‐state fermentation processes.

Construction of cotton leaf nitrogen content estimation model based on the PROSPECT model

Leaf nitrogen content (LNC) is an important index to measure the nitrogen deficiency in cotton. The rapid and accurate monitoring of LNC is of great significance for understanding the growth status of cotton and guiding precise fertilization in the field. At present, the hyperspectral technology monitoring of LNC is very mature, but it is interfered with by external factors such as shadow and soil, and data acquisition is still dependent on manpower. Therefore, on the basis of clarifying the correlation and quantitative relationship between physiological parameters and cotton LNC, the 400-2500 nm spectral curve was simulated based on PROSPECT-5 model. Combined with the measured spectra, the sensitive bands of leaf nitrogen content were screened, and four machine learning algorithms based on the reflectance of the sensitive bands were compared to construct a model for the estimation of LNC in cotton and determine the optimal model. The results show the following: (1) The parameter with the best correlation with nitrogen content was Cab, and the linear relationship was y=0.3942x+12.521, R2=0.81, RMSE=12.87 g/kg. (2) The shuffled frog leaping algorithm (SFLA) and the successive projections algorithm (SPA) were used to screen the relevant bands sensitive to LNC. SFLA selected nine characteristic bands, mainly distributed between 700 and 750 nm. SPA screened seven characteristic bands, mainly distributed between 670 and 760 nm. The characteristic bands of both screening methods were distributed near the red edge. (3) Based on the sensitive bands, the four machine learning algorithms were compared. Among them, the band modeling of SFLA screening under the random forest (RF) algorithm was the best (modeling set R2=0.973, RMSE=1.001 g/kg, rRMSE=3.41%, validation set R2=0.803, RMSE=3.191 g/kg, rRMSE=10.85%). In summary, this study proposes an optimal estimation model of cotton leaf nitrogen content based on the radiative transfer model, which provides a theoretical basis for the dynamic, accurate, and non-destructive monitoring of cotton leaf nitrogen content.

A rapid method for identification of Lanxangia tsaoko origin and fruit shape: FT-NIR combined with chemometrics and image recognition.

Lanxangia tsaoko's accurate classifications of different origins and fruit shapes are significant for research in L. tsaoko difference between origin and species as well as for variety breeding, cultivation, and market management. In this work, Fourier transform-near infrared (FT-NIR) spectroscopy was transformed into two-dimensional and three-dimensional correlation spectroscopies to further investigate the spectral characteristics of L. tsaoko. Before building the classification model, the raw FT-NIR spectra were preprocessed using multiplicative scatter correction and second derivative, whereas principal component analysis, successive projections algorithm, and competitive adaptive reweighted sampling were used for spectral feature variable extraction. Then combined with partial least squares-discriminant analysis (PLS-DA), support vector machine (SVM), decision tree, and residual network (ResNet) models for origin and fruit shape discriminated in L. tsaoko. The PLS-DA and SVM models can achieve 100% classification in origin classification, but what is difficult to avoid is the complex process of model optimization. The ResNet image recognition model classifies the origin and shape of L. tsaoko with 100% accuracy, and without the need for complex preprocessing and feature extraction, the model facilitates the realization of fast, accurate, and efficient identification.